NEW Model MPX - PIC Based Measurement Processor

Features - MPX Models 3 & 4

• Compatible with Standard 10XAS-Series & 10XBR-Series Passline-Independent Sensors. One or Two sensors per processor.

• On screen graphing of up to four simultaneous width parameters

• Data collection by internal clock or tachometer input

• High and Low Operating Limits provided for up to four channels of measurement data

• Data Logging provided with the ‘Strip Chart’ graphing routines

• Digital Measurement Readouts available in Imperial or Metric units

• Full screen mode for distant viewing of any one of four digital screens

• Network capability to connect directly to a local area network

MPX 1.0 Serial Output of Web Position (Raw Counts)

MPX 2.0 Serial Output, Analog Outputs, Bar Graph Options

Overview

The SCAN-A-LINE™ Model MPX is the next generation of versatile Measurement Processors from Harris Instrument Corporation.

Configurations

For more information on the New Model MPX-Series Measurement Processor, Contact Harris Instrument Corporation directly.

Top of Page

Features

• Compatible with SCAN-A-LINE™ EG-30A & 10XAS Sensors

• Various Analog Outputs on All Units except Level Two (type of output dependent upon unit model level).

• Left/Right Limit Relays Available (requires optional Bargraph Display – BGA Option).

• Switching Power Supply (±12VDC regulated for sensors and 5VDC regulated for logic circuits) and signal routing for up to two SCAN-A-LINE™ sensors. System Power: Universal 90 - 240VAC UL1950, FCC Class C.

• Model GPU Enclosure Dimensions: NEMA-style Steel 12" [305mm] wide x 14" [356mm] tall by 6" [152mm] deep.

Overview

The SCAN-A-LINE™ General Processing Unit – Model GPU Is a basic processor designed to provide operating power, a convenient enclosure and interface point for a host of Harris electronic circuit boards and sensors. There are three main configurations for the Model GPU using 10XAS-Series Sensors:

Level 3: For use with single 10XAS-Series sensors; 0 - 10VDC Absolute Width Analog & ±10VDC Deviation Centerline Position Analog Output.

Level 4: For use with single sensor (edge guide - ONLY) or dual sensor 10XAS-Series sensors; 0 - 10VDC Absolute Edge Position Analog & ±10VDC Deviation Centerline Position Analog Output.

Level 5: For use with dual 10XAS-Series sensors; 0 - 10VDC Absolute Edge Position Analog, ±10VDC Deviation Centerline Position Analog & 0 - 10VDC Width Analog Output.

Options

Absolute-to-Bipolar (ABC Option): For EG-Series sensors: Changes 0-10VDC signal to ±10VDC signal.

Auto-Zero (AZ Option: For 10XAS-Series sensors: Sets any strip position as a reference position (Levels 4 & 5).

Bargraph Display (BGA Option: Visually represents difference between a predetermined strip position and the detected strip
position. Includes annunciators and limit relays.

Line Driver (LDR Option): Converts sensor signals for routing to another SCAN-A-LINE™ processing unit up to 3000' [914m].

4/20 Current Loop (4/20 Option): 4/20mA Current Loop routes analog signals from Model GPU over long distances. Single or Dual configuration available.

First Edge Video (FEV Option): Pre-processor to detect the first edge viewed, ignoring all other edges.

Contact your manufacturers representative or fill out the SCAN-A-LINE™ General Information Request Form for quotation or our latest brochures.

Top of Page